Holders & cases

Shopping cart

Your shopping cart is empty.

Holders & cases

Holder DIN for 8x SSR Relay DIN rail holder for 8x SSR Relay module. Vertical or horizontal installation, customizable. Final fixation of DIN legs to the base with second glue. Compatible with LEGO® bricks. There is space... Detail specification In stock Price: 7,00 € incl. VAT	Holder DIN for USB HUB DIN rail holder for USB HUB i-Tec. Compatible with U3CHARGEHUBx line from i-Tec. For 7 and 10 ports model is one holder enough. For 13 and 16 ports two holders recommended. Vertical or horizontal... Detail specification 5 in stock Price: 4,00 € incl. VAT
Holder DIN for Krone LSA DIN holder for Krone LSA module. Universal for disconnection, connection (white) and ground (red). There is space for cabling under the base. Detail specification In stock Price: 6,00 € incl. VAT	Case for PIR HC-SR501 + DHT22 Housing for PIR HC-SR501 + DHT22 sensor. Measuring of the motion, temperature and humidity. Installation in hollow walls. Mounting the sensor in the box using the two screws provided. Diameter of... Detail specification In stock Price: 5,40 € incl. VAT
Case for PIR HC-SR501 Housing for PIR HC-SR501 sensor. Installation in hollow walls. Mounting the sensor in the box using the two screws provided. Diameter of the installation hole is 44 mm. Housing includes lens cover... Detail specification In stock Price: 3,50 € incl. VAT	Holder DIN for switch NETGEAR DIN holder for switch NETGEAR GS308E. There is space for cabling under the base. Detail specification 4 in stock Price: 7,00 € incl. VAT
Holder DIN for Arduino Mega Original DIN rail holder for Arduino Mega Original board. Vertical or horizontal installation, customizable. Final fixation of DIN legs to the base with second glue. Compatible with LEGO® bricks. There is... Detail specification In stock Price: 7,00 € incl. VAT

Newest articles

Tailscale - remote access without public IPRating: 90%

The Tailscale service solves access between individual devices if you don't have a public IP address. It's free for one user with support for up to 100 devices. We'll show you how to install Tailscale on a Raspberry Pi that you'll have at home and on a client (Android, iPhone) from which you'll want to access the home Raspberry Pi. Our example will be remote access to OpenHAB running on a Raspberry Pi. However, the same setup applies to many other applications - home NAS, PiHole, Home Assistant, Domoticz, NextCloud, and others.

Shelly vs OpenHABRating: 90%

The Shelly brand is known for its products that primarily communicate over WiFi, including smart plugs, relay switches, blinds control relays, and many other devices. One of the advantages for deployment is the ability to both read and control these devices using the universal MQTT protocol. Across existing add-ons for both OpenHAB and Home Assistant, we will demonstrate how to use Shelly devices without installing any additional extensions.

Victron vs Smart HomeRating: 0%

In this post, we will show you how to retrieve information from a photovoltaic power plant by Victron. We will connect to the Cerbo unit via MQTT. Based on these values, we can control various appliances (heating, boiler, etc.) and prevent the battery from being drained when they don't need to be.

Smart Home vs GoodWeRating: 50%

In the post, we will demonstrate step by step how to communicate directly with the GoodWe inverter in a smart home setup and obtain real-time information (unlike the SEMS portal). This information is essential if we want to react to current parameters in a smart home, such as activating additional cooling or controlling a socket with a various load.

Voice control of the houseRating: 60%

In this article, we will connect the Amazon Echo Dot voice assistant with open source home automation. We won't be using OpenHAB Cloud, so everything runs locally. In this case, a few additional settings are necessary, but the result is worth it!

Basics - Winbox, DHCPRating: 68.8%

In this series, we will look at the step-by-step setup of MikroTik devices for home users or a small business (up to 25 people). In the first article, we will focus on the initial setup - we will download Winbox and set up DHCP for the primary network and guest network. Similarly, we will also adjust the WiFi settings.

Alarm from existing PIR sensors in a smart home.Rating: 0%

In a your smart home, PIR sensors may not only be used to switch lights on and off based on motion, it is possible to utilize these sensors to detect the presence of motion in a particular room. This information can be used to create a relatively reliable uncertified home security system. In this guide, you will find the logic for how this can work in the OpenHAB software in our model smart home.

NFC tags in smart homeRating: 80%

NFC (Near Field Communication) tags are small plastic or paper stickers that can be used to automate various functions in the smart home. In this article, we will show you examples of use and a guide on how to write an action on an NFC tag using a mobile phone.