Shopping cart

Your shopping cart is empty.

Pi-Home

Ready-To-Use solution for low-voltage automation of a family house based on software OpenHAB and boards Raspberry Pi and Arduino. Predefined control of lights, heating circuits, socket circuits...

2 in stock

Price: 2 200,00 € incl. VAT

Arduino Mega Original Rev 3 with Ethernet Shield 2 included. DIN holder included. USB cable. Vertical or horizontal installation options. See details.

5 in stock

Price: 97,00 € incl. VAT

Arduino compatible module 8x SSR "High Trigger" relays 2A/230V with DIN holder and Dupont cables (8x) for Arduino board connection. Vertical or horizontal installation options. See details.

12 in stock

Price: 24,00 € incl. VAT

Krone LSA disconnection module with DIN holder included. There is space for cabling under the base.

15 in stock

Price: 12,00 € incl. VAT

An all-metal 8-port gigabit Ethernet switch with a range of advanced features such as QoS, VLAN, IGMP snooping v1, v2, and v3, as well as port mirroring and DIN mounts.

2 in stock

Price: 53,00 € incl. VAT

Krone LSA GND module with DIN holder included. There is space for cabling under the base.

6 in stock

Price: 16,00 € incl. VAT

Sensors PIR HC-SR501 + DHT22 with installation box. Measuring of the motion, temperature and humidity. Installation in hollow walls. Diameter of the installation hole is 67 mm. Housing includes...

11 in stock

Price: 13,50 € incl. VAT

PIR HC-SR501 sensor including installation box. Installation into hollow walls. The diameter of the installation hole is 44 mm. We provide a cover that can be attached using superglue, allowing...

9 in stock

Price: 7,20 € incl. VAT

The DS18B20 sensor is a digital thermometer with calibrated accuracy of ±0.5°C and resolution of up to 12 bits. Temperature information is transmitted digitally from the sensor to the Arduino, so...

On order

Price: 7,50 € incl. VAT
SSR Realy board DIN holder

DIN rail holder for 8x SSR Relay module. Vertical or horizontal installation, customizable. Final fixation of DIN legs to the base with second glue. Compatible with LEGO® bricks. There is space...

20 in stock

Price: 7,00 € incl. VAT
USB HUB DIN holder

DIN rail holder for USB HUB i-Tec. Compatible with U3CHARGEHUBx line from i-Tec. For 7 and 10 ports model is one holder enough. For 13 and 16 ports two holders recommended. Vertical or horizontal...

5 in stock

Price: 4,00 € incl. VAT
DIN Holder Krone LSA

DIN holder for Krone LSA module. Universal for disconnection, connection (white) and ground (red). There is space for cabling under the base.

20 in stock

Price: 6,00 € incl. VAT

Newest articles

Shelly OpenHAB MQTT
Shelly vs OpenHABRating: 
80%

The Shelly brand is known for its products that primarily communicate over WiFi, including smart plugs, relay switches, blinds control relays, and many other devices. One of the advantages for deployment is the ability to both read and control these devices using the universal MQTT protocol. Across existing add-ons for both OpenHAB and Home Assistant, we will demonstrate how to use Shelly devices without installing any additional extensions.

Victron & OpenHAB
Victron vs Smart HomeRating: 
0%

In this post, we will show you how to retrieve information from a photovoltaic power plant by Victron. We will connect to the Cerbo unit via MQTT. Based on these values, we can control various appliances (heating, boiler, etc.) and prevent the battery from being drained when they don't need to be.

Smart Home GoodWe inverter
Smart Home vs GoodWeRating: 
50%

In the post, we will demonstrate step by step how to communicate directly with the GoodWe inverter in a smart home setup and obtain real-time information (unlike the SEMS portal). This information is essential if we want to react to current parameters in a smart home, such as activating additional cooling or controlling a socket with a various load.

Voice control smart home
Voice control of the houseRating: 
60%

In this article, we will connect the Amazon Echo Dot voice assistant with open source home automation. We won't be using OpenHAB Cloud, so everything runs locally. In this case, a few additional settings are necessary, but the result is worth it!

MikroTik - Winbox, DHCP, Ranges
Basics - Winbox, DHCPRating: 
68.7%

In this series, we will look at the step-by-step setup of MikroTik devices for home users or a small business (up to 25 people). In the first article, we will focus on the initial setup - we will download Winbox and set up DHCP for the primary network and guest network. Similarly, we will also adjust the WiFi settings.

Alarm Smart Home PIR
Alarm from existing PIR sensors in a smart home.Rating: 
0%

In a your smart home, PIR sensors may not only be used to switch lights on and off based on motion, it is possible to utilize these sensors to detect the presence of motion in a particular room. This information can be used to create a relatively reliable uncertified home security system. In this guide, you will find the logic for how this can work in the OpenHAB software in our model smart home.

NFC Tag Example in Smart Home
NFC tags in smart homeRating: 
80%

NFC (Near Field Communication) tags are small plastic or paper stickers that can be used to automate various functions in the smart home. In this article, we will show you examples of use and a guide on how to write an action on an NFC tag using a mobile phone.

WireGuard iOS
WireGuard on iOS devicesRating: 
85%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from iOS.

WireGuard on Android device
WireGuard on Android devicesRating: 
0%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from Android.

WireGuard on MikroTikRating: 
80%

This article describes the self setup of the WireGuard VPN protocol on MikroTik devices with RouterOS version 7 and higher. This phenomenal VPN is very fast, secure, and easily configurable in a home environment. It can be said that it is currently the best VPN for home use available.