Home DIY NAS on Raspberry Pi - backup, backup, backup

Posted Thursday, August 29 - 23:24pm by

Michal Novotný

RAID vs RSync

One of the main reasons for NAS is - in addition to the convenience of having everything together - a backup of data. In NAS users typically used RAID. Depending on the number of disks, you can choose the RAID type according to the desired features/advantages. But beware! RAID is not a full backup. Typically, using RAID 1 in the case of two spinning disks increases the robustness of the solution, i.e. if one spinning disc is damaged, you have the same data on the second disc. But what if you damage/delete data on first disc? This action will also be performed on your mirrored disk. What happens in the case of cryptovirus? Encrypts data on both drives.

In a home environment, we recommend automatically copying the data to a second disk. For these purposes, there is an RSync tool in Linux world. You can set an automatic backup of the entire content or specific folders for each night or as needed. It can even keep the same content as the primary disc and keep files that have already been deleted on the primary disc. If you make a mistake, your data will be available on a second disc for some time. Only the special user has access to the second disc, so the cryptovirus can't get in. At least not for old content.

Rsync settings

Firstly, you must have Shared Folders on primary and secondary disc. To distinguish them easily, the main folder on drive A is called Photo and the folder where the backup on drive B will be made is named PhotoBackup in example.

Under Rsync tab, turn on the server service. Then switch to Jobs and add a job that runs a backup at a given time of the week. On the screenshot below is a Photo backup setting from A to PhotoBackup folder on B, each day at 3:00 a.m. There is no deletion of photos that no longer exist on drive A. Of course, this can be changed in the Delete box settings.

What else?

But even this solution is not a full-fledged backup. In any case, you must have an old USB drive or network location, where you copy the NAS contents once every 6 months and place the disk preferably in a safe or somewhere safe outside your house. This will protect your photos and data from fire and other catastrophic scenario. Do not forget for this kind of offline copy!

Add comment

Nejlepší články z blogu

Tailscale - remote access without public IPRating: 90%

The Tailscale service solves access between individual devices if you don't have a public IP address. It's free for one user with support for up to 100 devices. We'll show you how to install Tailscale on a Raspberry Pi that you'll have at home and on a client (Android, iPhone) from which you'll want to access the home Raspberry Pi. Our example will be remote access to OpenHAB running on a Raspberry Pi. However, the same setup applies to many other applications - home NAS, PiHole, Home Assistant, Domoticz, NextCloud, and others.

Shelly vs OpenHABRating: 90%

The Shelly brand is known for its products that primarily communicate over WiFi, including smart plugs, relay switches, blinds control relays, and many other devices. One of the advantages for deployment is the ability to both read and control these devices using the universal MQTT protocol. Across existing add-ons for both OpenHAB and Home Assistant, we will demonstrate how to use Shelly devices without installing any additional extensions.

Victron vs Smart HomeRating: 0%

In this post, we will show you how to retrieve information from a photovoltaic power plant by Victron. We will connect to the Cerbo unit via MQTT. Based on these values, we can control various appliances (heating, boiler, etc.) and prevent the battery from being drained when they don't need to be.

Smart Home vs GoodWeRating: 50%

In the post, we will demonstrate step by step how to communicate directly with the GoodWe inverter in a smart home setup and obtain real-time information (unlike the SEMS portal). This information is essential if we want to react to current parameters in a smart home, such as activating additional cooling or controlling a socket with a various load.

Voice control of the houseRating: 60%

In this article, we will connect the Amazon Echo Dot voice assistant with open source home automation. We won't be using OpenHAB Cloud, so everything runs locally. In this case, a few additional settings are necessary, but the result is worth it!

Basics - Winbox, DHCPRating: 68.8%

In this series, we will look at the step-by-step setup of MikroTik devices for home users or a small business (up to 25 people). In the first article, we will focus on the initial setup - we will download Winbox and set up DHCP for the primary network and guest network. Similarly, we will also adjust the WiFi settings.

Alarm from existing PIR sensors in a smart home.Rating: 0%

In a your smart home, PIR sensors may not only be used to switch lights on and off based on motion, it is possible to utilize these sensors to detect the presence of motion in a particular room. This information can be used to create a relatively reliable uncertified home security system. In this guide, you will find the logic for how this can work in the OpenHAB software in our model smart home.

NFC tags in smart homeRating: 80%

NFC (Near Field Communication) tags are small plastic or paper stickers that can be used to automate various functions in the smart home. In this article, we will show you examples of use and a guide on how to write an action on an NFC tag using a mobile phone.

WireGuard on iOS devicesRating: 88%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from iOS.

WireGuard on Android devicesRating: 50%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from Android.

Kategorie

Kategorie