Linux for a test? Launch it directly from a flash drive in 5 minutes

Posted Friday, June 30 2023 - 23:18pm by

Michal Novotný

The ideal starting point is the safest way to familiarize yourself with a desktop Linux system directly on your PC from a flash disk. We have prepared a slightly modified "live persistent" distribution of Ubuntu MATE for you to download. This means that it saves the modified content, and you can use this operating system from the flash disk repeatedly. You will immediately see how compatible the distribution is with your computer, and you can confidently try out a web browser, multimedia player, video conferencing, or install an application from the Snap Store. The LibreOffice office suite is also included, allowing you to open any documents or spreadsheets. Or simply explore this free environment. Save anything you need, and then you can come back to it later—a portable, versatile system that you can plug into any computer and run without affecting the primary installation.

If you encounter any occasional slowdowns, it's most likely due to the flash disk. Generally, Linux distributions are faster on the same computer compared to Windows and require fewer resources, so they work smoothly even on older computers. However, for full-fledged everyday use, they should also be installed on the hard disk like any other operating system. You can perform a permanent installation on the hard disk directly from the mentioned live distribution if you like the system. It's free, no registration, no ads, no commerce.

Hardware

Any computer, laptop, or single-board computer like Raspberry Pi

16GB flash disk

Software

Ubuntu MATE 20.10 Live Persistent

For the initial introduction, we have chosen a versatile distribution supported on various architectures such as aarch64, armhf, i686, powerpc, x86_64, so it is highly likely that we will match the hardware you want to try Linux on. Ubuntu MATE is based on the Ubuntu distribution and, although it certainly does not belong to the most widely used Linux distributions, in our opinion, it is a very good choice for first-time users and learners.

1) Download the Czech live persistence distribution where we have preinstalled a few applications like VLC, Kdenlive, KODI, etc.

Ubuntu-MATE-20.10-OpenTUX-EN

2) Download the Etcher program. It is a utility used to correctly write the downloaded file to the flash disk:

https://www.balena.io/etcher/

You can also use the portable version, which does not require installation and can be run once. Insert the prepared flash disk, launch Etcher, select the .img image. Make sure that Etcher shows your Flash disk (disconnect other flash disks for safety), and once you are sure, click Flash!

After finishing, insert the flash disk into the computer where you want to try using the Linux operating system and restart the computer. Once the computer logo appears, press the key to select the boot device. It is usually the F12 key (Lenovo, Toshiba, Dell), ESC key (HP, Sony), or F8 key (Asus). If none of them work, try finding the manufacturer in the table on this link. From the offered list, select USB or USB FLASH device to boot the system.

Jak bootovat linux z flash

Welcome! You are now a user of the Linux operating system. Specifically, it is a system based on Debian called Ubuntu MATE. Here you have all the essential programs for work and multimedia. Office suite, web browser, photo editing, video editing and playback, educational tools, video conferencing. If you are missing something, you can check the Snap Store and install other interesting applications or games with just one click. No registration required, no ads, no need to pay.

Screenshoty z live distribuce

Add comment

Nejlepší články z blogu

Tailscale - remote access without public IPRating: 90%

The Tailscale service solves access between individual devices if you don't have a public IP address. It's free for one user with support for up to 100 devices. We'll show you how to install Tailscale on a Raspberry Pi that you'll have at home and on a client (Android, iPhone) from which you'll want to access the home Raspberry Pi. Our example will be remote access to OpenHAB running on a Raspberry Pi. However, the same setup applies to many other applications - home NAS, PiHole, Home Assistant, Domoticz, NextCloud, and others.

Shelly vs OpenHABRating: 90%

The Shelly brand is known for its products that primarily communicate over WiFi, including smart plugs, relay switches, blinds control relays, and many other devices. One of the advantages for deployment is the ability to both read and control these devices using the universal MQTT protocol. Across existing add-ons for both OpenHAB and Home Assistant, we will demonstrate how to use Shelly devices without installing any additional extensions.

Victron vs Smart HomeRating: 0%

In this post, we will show you how to retrieve information from a photovoltaic power plant by Victron. We will connect to the Cerbo unit via MQTT. Based on these values, we can control various appliances (heating, boiler, etc.) and prevent the battery from being drained when they don't need to be.

Smart Home vs GoodWeRating: 50%

In the post, we will demonstrate step by step how to communicate directly with the GoodWe inverter in a smart home setup and obtain real-time information (unlike the SEMS portal). This information is essential if we want to react to current parameters in a smart home, such as activating additional cooling or controlling a socket with a various load.

Voice control of the houseRating: 60%

In this article, we will connect the Amazon Echo Dot voice assistant with open source home automation. We won't be using OpenHAB Cloud, so everything runs locally. In this case, a few additional settings are necessary, but the result is worth it!

Basics - Winbox, DHCPRating: 68.8%

In this series, we will look at the step-by-step setup of MikroTik devices for home users or a small business (up to 25 people). In the first article, we will focus on the initial setup - we will download Winbox and set up DHCP for the primary network and guest network. Similarly, we will also adjust the WiFi settings.

Alarm from existing PIR sensors in a smart home.Rating: 0%

In a your smart home, PIR sensors may not only be used to switch lights on and off based on motion, it is possible to utilize these sensors to detect the presence of motion in a particular room. This information can be used to create a relatively reliable uncertified home security system. In this guide, you will find the logic for how this can work in the OpenHAB software in our model smart home.

NFC tags in smart homeRating: 80%

NFC (Near Field Communication) tags are small plastic or paper stickers that can be used to automate various functions in the smart home. In this article, we will show you examples of use and a guide on how to write an action on an NFC tag using a mobile phone.

WireGuard on iOS devicesRating: 88%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from iOS.

WireGuard on Android devicesRating: 50%

In this article, you will find a detailed guide on how to connect to WireGuard VPN from Android.

Kategorie

Kategorie